Thursday, April 23, 2015







A Light following robot, This example is a simple light follower where it used L293D Motor driver and LDR based sensor. This robot does not require any programming, it uses the logic available in the motor driver (when the pins 12 and 14 are high) both the motor rotates in the forward direction, when the pin 7 is high it moves to the left , likewise when the pin 10 is high it moves to the right. 




The figure below depicts overall connection of the L293D motor driver. 





LDR based light sensor circuit

working principle and making of the sensor can find in the below video. 



This is very simple to make and it not involves much cost really cheap , this can gives you an idea about how the l293D works and logic behind the IC and how to interface with the sensor , if you are getting starting with robotics this could be the perfect example to get start up with. 

7 comments:

  1. Only a single how to get free amazon gift cards and we can get amazon gift card codes after generating amazon codes from this place.

    ReplyDelete
  2. nice blog.Webmasters create a robots.txt file to instruct search engine robots to crawl and index pages that are a part of a website.robots txt checker

    ReplyDelete
  3. can i get circuit diagram for this robot other than this bread board connection

    ReplyDelete
  4. I'd like to thank you for the efforts you have put in writing this blog. I'm hoping to check out the same high-grade blog posts by you in the future as well.
    Java Training in Bangalore

    ReplyDelete
  5. Very good post.
    All the ways that you suggested for find a new post was very good.
    rouge planet

    ReplyDelete